Opti-Coat Pro +

If It’s Good Enough For Our Car It’s Good Enough For Yours

Opti-Coat Pro Plus 7 Year Factory Warranty

San Antonio– Concours Auto Salon is The original home for Opti-Coat Pro in south Texas. We’ve been applying it since 2008 and no other shop has more experience working with,applying and maintaining Opti-Coat Pro than us. Application of Opti-Coat Pro requires more than a good hand wash prior to it’s application for it to properly bond to your paints surface. Concours Auto Salon has protected thousands of cars in San Antonio and South Teaxs.  


What is Opti-Coat Pro Plus?

Opt-Coat Pro Plus is a hard wearing, ceramic clear coat for superior resistance to scratching (9H), and surface protection from chemical etching due to environmental impacts.

The Opti-Coat pre-polymer cross links, and forms a continuous protective film on the painted surface it is applied to, similar to a single component isocyanate that forms a clear coat finish.

Opt-Coat Pro Plus has better chemical resistance, scratch and mar resistance, and release properties than any automotive paint coating in use. It provides permanent protection for all modern factory paints.

What Makes Opti-Coat Pro Plus So Different?

Opt-Coat Pro Plus is not a paint protection wax, sealant or nano-coating that will wash away, or break down over time. Opti-Coat bonds permanently with the factory coating, protecting the surface indefinitely and will not delaminate.

A single layer of Optimum Clear Coating measures up to 2 microns in thickness. When compared to other paint protection products, Opti-Coat is more than 100 times thicker, with tests showing a wax coating measuring less than 0.02 microns.

This allows Opti-Coat to effectively absorb damage that would otherwise affect the factory paint layers. Swirl marks and light scratches are not only decreased by the harder Optimum Ceramic Coating, the factory paint is also protected and preserved.

Opti-Coat is completely resistant to acidic environmental substances such as bird lime (bird droppings). Unlike your factory clear coating that can be permanently damaged, Opti-Coat will not etch or dissolve when it comes in contact with these substances, and a clean, glossy clear coating is maintained.

Optic-Coat Pro + will enhance and protect all cars

The Best Time To Apply Opti-Coat Pro Plus

It’s best to apply Opti-Coat soon after you take delivery of your “New” vehicle. However, you can have Opti-Coat applied to your “freshly detailed” used vehicle.

10 Step Application Process

This application process is the best method and recommended by Optimum to achieve the maximum gloss and longest protection from Opti-Coat Pro

                • Through had wash of the vehicle body
                • A chemical wash with Optimum Ferix
                • Clay treatment for all painted surfaces
                • Inspect the paint surface with inspection lights
                • Light polish to remove any minor defects in the paint
                • Rewash the vehicle removing all polishing oils.
                • Blowout all nooks and crannies of any excess water.
                • Polish paint again with Opti-Coat primer polish
              • Apply Opti-Coat Pro to all painted surfaces includings lights.
              • Apply Opti-Coat Pro+ to all painted surfaces including lights

Contact the Opti-Coat Pro’s for further information and to schedule your appointment